Compatible with industry standard rack cords including our FT600P/620P series cords

• La construcción hermética ayuda a evitar que la condensación y la humedad causen corrosión en las conexiones del bastidor.
• Bloque de terminales de doce posiciones para el reemplazo rápido de varios tipos de cables, incluidos cables ópticos, de termistor, de tierra y deadman
• Large internal volume allows ample room for wiring and easy installation.
• Mesh cord grip reduces cable strain and prevent cable pull-out.
• El gancho para cable integrado sostiene el cable mientras no está en uso.
• Socket J560 extraíble integrado de 13 pines compatible con cables grises (7 pines) y amarillos (13 pines).

See 11068PA

Conduit sealing joint either sold separately or provided by the customer

Threadless entry sized for 3/4 NPT conduit. See technical specifications in manual 11068PA

FT7500 series junction boxes are designed to provide a convenient, safe, and protected point of service for terminal side accessories. The junction box is intended to house the connections between a rack monitor, and its supporting accessories such as a deadman switch, and rack cords. When installed correctly, the junction box will protect rack cords from excessive wear and tear, and cord connections from rain, dirt, and corrosion. The pull away socket is designed to allow terminal operators to quickly install or exchange rack cords due to a driver pulling away while still connected.